Huawei Quidway S3900 Series - Page 722

Operation Manual – Mirroring
Quidway S3900 Series Ethernet Switches Chapter 1 Mirroring Configuration
Huawei Technologies Proprietary
1-18
III. Configuration Example
z The source port is GigabitEthernet 1/1/1. Mirror all packets received and sent via
this port.
z The destination port is GigabitEthernet 1/1/4.
1) Configuration procedure
<Quidway> system-view
[Quidway] interface gigabitEthernet 1/1/4
[Quidway-GigabitEthernet1/1/4] monitor-port
[Quidway-GigabitEthernet1/1/4] quit
[Quidway] interface gigabitEthernet 1/1/1
[Quidway-GigabitEthernet1/1/1] mirroring-port both
1.4.3 Displaying Mirroring
After the above configuration, you can use the display command in any view to view
the mirroring running information, so as to verify the configurations you made..
Table 1-14 Display mirroring
Operation Command
Display parameter settings of
a mirroring group
display mirror
Display parameter settings of
traffic mirroring
display qos-interface { interface-type
interface-number | unit-id } mirrored-to