Huawei Quidway S3900 Series - Page 744

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Cluste
r
Huawei Technologies Proprietary
1-8
1.2.2 Enabling NDP Globally and for Specific Ports
Table 1-3 Enable NDP globally and for a specific port
Operation Command Description
Enter system view
system-view
—
Enable NDP globally
ndp enable
Required
By default, NDP is enabled
globally
In system
view
ndp enable interface
port-list
Enter
Ether
net
port
view
interface interface-type
interface-number
Enable
NDP for
the
specified
Ethernet
ports
In
Ether
net
port
view
Enabl
e
NDP
on
the
port
ndp enable
You must choose one of
them
By default, NDP is enabled
on the port
1.2.3 Configuring NDP-related Parameters
Table 1-4 Configure NDP-related parameters
Operation Command Description
Enter system view
system-view
—
Configure the
holdtime of NDP
information
ndp timer aging
aging-in-seconds
Optional
By default, the aging time of
NDP packets is 180 seconds
Configure the
interval to send
NDP packets
ndp timer hello seconds
Optional
By default, the interval of
sending NDP packets is 60
seconds
1.2.4 Enabling NTDP Globally and for Specific Ports
Table 1-5 Enable NTDP globally and for specific ports
Operation Command Description
Enter system view
system-view
—