Huawei Quidway S3900 Series User Manual

Operation Manual - File System Management
Quidway S5100-EI Series Ethernet Switches-Release 1510 Chapter 2 FTP/TFTP Lighting Configuration
Huawei Technologies Proprietary
2-2
Figure 2-1 Clockwise rotating of the seven-segment digital LED
Table 2-1 Upload file from an FTP client to the switch acting as FTP server
Device Operation Command Description
Enable FTP
server
ftp sever
enable
Required
By default, FTP server is
disabled.
Add a local
user and enter
local user view
local-user
user-name
Required
Set a
password for
the local user
password
{ simple |
cipher }
password
Required
FTP
server
(S3900)
Set the
password
display mode
of local users
local-user
password-displ
ay-mode { auto
| cipher-force }
Optional
By default, this mode is auto (that
is, the switch displays user
passwords in the modes adopted
when the passwords are set).
Log into the
remote FTP
server
—
Required
For detailed configuration, refer to
the configuration instruction
relevant to FTP client.
FTP client
Upload file
from the FTP
client to the
FTP server
—
Required
For detailed configuration, refer to
the configuration instruction
relevant to FTP client.
II. Enabling FTP client on the switch
After FTP client is enabled on an S3900 switch, the seven-segment digital LED on the
front panel of the switch will rotate clockwise when the FTP client (the S3900 switch) is
downloading file from a FTP server, and will stop rotating when the file downloading is
finished, as show in
Figure 2-1.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English