Huawei Quidway S3900 Series User Manual

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 FTP and TFTP Configuration
Huawei Technologies Proprietary
1-10
Operation Command Description
Upload a local file to the
remote FTP server
put localfile [ remotefile ] Optional
Rename a file on a remote
host.
rename remote-source
remote-dest
Optional
Switch to another FTP
user
user username
[ password ]
Optional
Connect to a remote FTP
server
open { ip-address |
server-name } [ port ]
Optional
Terminate the current FTP
connection without exiting
FTP client view
disconnect
Optional
Terminate the current FTP
connection without exiting
FTP client view
close
Optional
Terminate the current FTP
connection and quit to
user view
quit
Optional
Terminate the current FTP
control connection and
data connection
bye
Optional
Display the on-line help on
a specified command
concerning FTP
remotehelp
[ protocol-command ]
Optional
Enable verbose function
verbose
Optional
The verbose function is
enabled by default.
II. Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an
FTP client, so that it connects with a remote FTP server through the IP address of the
specified interface or the specified IP address.
Table 1-8 Specify the source interface and source IP address for an FTP client
Operation Command Description
Specify the source
interface so that the FTP
client uses it to connect
with an FTP server for the
next time
ftp { cluster | remote-server }
source-interface
interface-type
interface-number
Optional

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English