Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 FTP and TFTP Configuration
Huawei Technologies Proprietary
1-13
Caution:
If available space on the Flash memory of the switch is not enough to hold the file to be
uploaded, you need to delete files from the Flash memory to make room for the file.
# Connect to the FTP server using the ftp command. You need to provide the IP
address of the FTP server, the user name and the password as well.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Enter the authorized directory on the FTP server.
[ftp] cd switch
# Run the put command to upload the configuration file named vrpcfg.cfgto the FTP
server.
[ftp] put vrpcfg.cfg
# Run the get command to download the file named switch.bin to the Flash memory of
the switch.
[ftp] get switch.bin
# Run the quit command to terminate the FTP connection and quit to user view.
[ftp] quit
<Quidway>
# Run the boot boot-loader command to specify the downloaded file (switch.bin) to be
the startup file used when the switch starts the next time, and then restart the switch.
Thus the switch application is upgraded.
<Quidway> boot boot-loader switch.bin
<Quidway> reboot
To Next Page
Loading...
Need help?
General