Huawei Quidway S3900 Series - Page 895

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Information Cente
r
Huawei Technologies Proprietary
1-17
II. Network diagram
Switch
PC
Network
SwitchSwitch
PC
Network
Figure 1-2 Network diagram for log output to a Linux log host
III. Configuration procedure
1) Configure the switch:
# Enable the information center.
<Quidway> system-view
[Quidway] info-center enable
# Configure the host whose IP address is 202.38.1.10 as the log host. Set the output
language to English. Permit all modules to output information with severity level higher
than error to the log host.
[Quidway] info-center loghost 202.38.1.10 facility local7 language english
[Quidway] info-center source default channel loghost log level errors debug
state off trap state off
2) Configure the log host:
Step 1: Execute the following commands as the superuser (root user).
# mkdir /var/log/Quidway
# touch /var/log/Quidway/information
Step 2: Edit the file “/etc/syslog.conf” as the superuser (root user) to add the following
selector/action pair.
# Quidway configuration messages
local7.info /var/log/Quidway/information