Operation Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 BootROM and Host Software Loading
Huawei Technologies Proprietary
1-13
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get s3900.btm
[ftp] bye
Note:
When using different FTP server software on PC, different information will be output to
the switch.
Step 2: Update the BootROM program on the switch.
<Quidway>boot bootrom s3900.btm
This will update BootRom file on unit 1. Continue? [Y/N] y
Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
Step 3: Restart the switch.
<Quidway> reboot
Note:
Before restarting the switch, make sure you have saved all other configurations that
you want, so as to avoid losing configuration information.
2) Loading host software
Loading the host software is the same as loading the BootROM program, except for
that the file to be downloaded is the host software file, and that you need to use the
boot boot-loader command to select the host software at reboot of the switch.
After the above operations, the BootROM and host software loading is completed.
Pay attention to the following:
z The loading of BootROM and host software takes effect only after you restart the
switch with the reboot command.
z If the space of the Flash memory is not enough, you can delete the useless files in
the Flash memory before software downloading.
z No power-down is permitted during software loading.
To Next Page
Loading...
