Huawei Quidway S3900 Series User Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 8 User Control
Huawei Technologies Proprietary
8-6
Operation Command Description
Quit to system
view
quit —
Apply the ACL
while configuring
the SNMP
community name
snmp-agent community
{ read | write }
community-name
[ [ mib-view view-name ] |
[ acl acl-number ] ]*
Optional
By default, SNMPv1 and
SNMPv2c use community
name to access.
Apply the ACL
while configuring
the SNMP group
name
snmp-agent group { v1 |
v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent group v3
group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Optional
By default, the authentication
mode and the encryption
mode are configured as none
for the group.
 Note:
You can specify different ACLs while configuring the SNMP community name, and the
SNMP group name.
As SNMP community name is a feature of SNMPv1 and SNMPv2c, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMPv1 or SNMPv2c.
Similarly, as SNMP group name is a feature of SNMPv2c and the higher SNMP
versions, the specified ACLs in the commands that configure SNMP group names take
effect in the network management systems that adopt SNMPv2c or higher SNMP
versions. If you specify ACLs in the commands, the network management users are
filtered by the SNMP group name.
8.3.3 Configuration Example
I. Network requirements
Only SNMP users sourced from the IP addresses of 10.110.100.52 and 10.110.100.46
are permitted to access the switch.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English