Huawei Quidway S5600 Series User Manual

Operation Manual – Port Basic Configuration
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Port Basic Configuration
Huawei Technologies Proprietary
1-7
Operation Command Remarks
Add the current hybrid
port to a specified
VLAN
port hybrid vlan
vlan-id-list { tagged |
untagged }
Optional
For a hybrid port, you can
configure to tag the packets
of specific VLANs, based on
which the packets of those
VLANs can be processed in
differently ways.
1.2.6 Configuring Trunk Port Attribute
Table 1-9 Configure trunk port attribute
Operation Command Remarks
Enter system view
System-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the link type of the port to
trunk
port link-type trunk
Required
Set the default VLAN ID for
the trunk port
port trunk pvid vlan
vlan-id
Optional
If no default VLAN ID is
set for a trunk port,
VLAN 1 (system
default VLAN) is used
as the default VLAN of
the port.
Add the current trunk port to
a specified VLAN
port trunk permit vlan
{ vlan-id-list | all }
Optional
1.2.7 Copying the Configuration of a Port to Other Ports
To make some other ports have the same configuration as that of a specific port, you
can copy the configuration of the specific port to the ports.
Specifically, the following types of port configuration can be copied from one port to
other ports: VLAN configuration, protocol-based VLAN configuration, LACP
configuration, QoS configuration, GARP configuration, STP configuration and initial
port configuration.
z VALN configuration: includes IDs of the VLANs allowed on the port and the default
VLAN ID of the port;
z Protocol-based VLAN configuration: includes IDs and indexes of the
protocol-based VLANs allowed on the port;

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English