Huawei Quidway S5600 Series - Configuring a Virtual Router Ip Address

Operation Manual – VRRP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
VRRP Configuration
Huawei Technologies Proprietary
1-7
Configuration Description Related section
Configure backup
group-related parameters
Required
Section
1.2.3
"
Configuring Backup
Group-Related
Parameters
”
VRRP backup group interface
tracking configuration
Optional
Section
1.2.4
“Configuring the Port
Tracking Function
”
VRRP auto detect
configuration
Optional
Section
1.2.5
"
Configuring the Auto
Detect Function for
VRRP
”
1.2.2 Configuring a Virtual Router IP address
Table 1-3 lists the operations to configure a virtual router IP address (suppose you have
correctly configured the relation between the port and VLAN):
Table 1-3 Configure a virtual router IP address
Operation Command Description
Enter system view system-view —
Configure that the
virtual IP address
can be pinged
vrrp ping-enable
Optional
By default, the virtual IP
address cannot be pinged.
Map the virtual
router IP address
to a MAC address
vrrp method { real-mac |
virtual-mac }
Optional
By default, the virtual IP
address of a backup group is
mapped to a virtual router IP
address.
Create a VLAN
vlan vlan-id
—
This operation creates the
VLAN to which the backup
group corresponds. The
vlan-id argument is the ID of
the VLAN.
Quit to system view
quit
—
Enter VLAN
interface view
interface Vlan-interface
vlan-id
—
Configure a virtual
router IP address
vrrp vrid virtual-router-id
virtual-ip virtual-ip-address
Optional