Huawei Quidway S5600 Series User Manual

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
RMON Configuration
Huawei Technologies Proprietary
2-4
Operation Command Description
Add an event entry
rmon event event-entry
[ description string ] { log | trap
trap-community | log-trap
log-trapcommunity | none }
[ owner text ]
Optional
Add an alarm entry
rmon alarm entry-number
alarm-variable sampling-time
{ delta | absolute }
rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2
[ owner text ]
Optional
Before adding an alarm
entry, you need to use the
rmon event command to
define the event
referenced by the alarm
entry.
Add an extended
alarm entry
rmon prialarm entry-number
prialarm-formula prialarm-des
sampling-timer { delta |
absolute | changeratio }
rising_threshold
threshold-value1 event-entry1
falling_threshold
threshold-value2 event-entry2
entrytype { forever | cycle
cycle-period } [ owner text ]
Optional
Before adding an
extended alarm entry, you
need to use the rmon
event command to define
the event referenced by
the extended alarm entry.
Enter Ethernet port
view
interface interface-type
interface-number
—
Add a history entry
rmon history entry-number
buckets number interval
sampling-interval [ owner text ]
Optional
Add a statistics
entry
rmon statistics entry-number
[ owner text ]
Optional
 Note:
z The rmon alarm and rmon prialarm commands take effect on existing nodes only.
z For each port, only one RMON statistics entry can be created. That is, if an RMON
statistics entry is already created for a given port, creation of another entry with a
different index for the same port will not succeed.
2.3 Displaying RMON
After the above configuration, you can execute the display command in any view to
display the RMON running status, and verify the effect of the configuration.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English