Huawei Quidway S5600 Series User Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-9
2.5 Console Port Login Configuration with Authentication
Mode Being Password
2.5.1 Configuration Procedure
Table 2-6 Console port login configuration with the authentication mode being
password
Operation Command Description
Enter system view
system-view
—
Enter AUX user
interface view
user-interface
aux 0
—
Configure to
authenticate users
using the local
password
authentication-m
ode password
Required
By default, users logging into a switch
through the Console port are not
authenticated; while those logging in
through Modems or Telnet are
authenticated.
Set the local
password
set
authentication
password
{ cipher | simple }
password
Required
Set the
baud rate
speed
speed-value
Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Set the
check
mode
parity { even |
mark | none |
odd | space }
Optional
By default, the check mode of a
Console port is set to none, that is, no
check bit.
Set the
stop bits
stopbits { 1 | 1.5 |
2 }
Optional
The default stop bits of a Console port
is 1.
Configur
e the
Console
port
Set the
data bits
databits { 7 | 8 }
Optional
The default data bits of a Console port
is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege
level level
Optional
By default, commands of level 3 are
available to users logging into the
AUX user interface.
Make terminal
services available to
the user interface
shell
Optional
By default, terminal services are
available in all user interfaces.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English