Huawei Quidway S5600 Series User Manual

Operation Manual – Port Security & Port Binding
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1 Port Security Configuration
Huawei Technologies Proprietary
1-7
Operation Command Description
Set the maximum
number of Security MAC
addresses allowed by
the port
port-security
max-mac-count
count-value
Required
By default, the maximum
number of Security MAC
addresses is not limited
Set the port mode to
autolearn
port-security port-mode
autolearn
Required
Add a Security MAC
address manually
mac-address security
mac-address [ interface
interface-type
interface-number ] vlan
vlan-id
Required
This command can be
configured either in
system view or Ethernet
port view
Note that:
1) The port-security port-mode autolearn command cannot be configured with the
following features at the same time:
z Static and black-hole MAC address
z Voice VLAN feature
z 802.1x feature
z port link aggregation
z configuration of mirroring reflect port
2) The port-security max-mac-count count-value command cannot be configured
with the mac-address max-mac-count count.
1.3 Displaying Port Security Configuration
After the above-mentioned configuration, you can use the display command in any
view to view the port-security related information, so as to verify configuration result.
Table 1-4 Display port security configuration
Operation Command Description
Display information about
port security configuration
display port-security
[ interface interface-list ]
Display the information
about Security MAC
address configuration
display mac-address security
[ interface interface-type
interface-number ] [ vlan vlan-id ]
[ count ]
The display
command can be
executed in any
view.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English