Huawei Quidway S5600 Series User Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 7 Route Capacity Configuration
Huawei Technologies Proprietary
7-2
7.2 Route Capacity Configuration
Route capacity configuration includes:
z Setting the lower limit and the safety value of switch memory,
z Enabling/disabling the switch to recover the disconnected routing protocol
automatically.
7.2.1 Setting the Lower Limit and the Safety Value of the Switch Memory
Perform the following configuration in system view.
Table 7-1 Set the lower limit and the safety value of switch memory
Operation Command Description
Enter system view
system-view
—
Set the lower limit and the
safety value of switch
memory
memory { safety safety-value |
limit limit-value }*
Optional
By default, the
default values are
used.
 Note:
The safety-value must be greater than the limit-value.
7.2.2 Enabling/Disabling Automatic Protocol Connection Recovery
Table 7-2 Enable automatic protocol recovery
Operation Command Description
Enter system view
system-view
—
Enable automatic protocol
recovery
memory auto-establish
enable
Optional
By default,
automatic protocol
connection
recovery is
enabled.
Disable automatic protocol
connection recovery
memory auto-establish
disable
Optional
Perform this
configuration with
caution.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English