Huawei Quidway S5600 Series User Manual

Operation Manual – File System Management
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 File System Management and
Configuration
Huawei Technologies Proprietary
1-2
File operations and file attribute operations are independent of each other. For example,
if you delete a file with the main attribute from the Flash memory, the main attribute is
not deleted. It becomes the attribute of a valid file that is later downloaded to the Flash
memory and has the same name as the previously deleted one.
After the BootROM of a switch is upgraded, the previous default app startup file will
have the main attribute.
1.1.2 Configuring File Attributes
You can configure and view the main attribute and backup attribute of the files used for
the next startup of a switch, and switch the main and backup attribute of the files.
Perform the configuration listed in
Table 1-2 in user view. The display commands can
be executed in any view.
Table 1-2 Configure file attributes
Operation Command Description
Configure the app file with
the main attribute for the
next startup
boot boot-loader file-url
[ fabric ]
Optional
Configure the app file with
the backup attribute for the
next startup
boot boot-loader
backup-attribute file-url
[ fabric ]
Optional
Configure the Web file and
its attribute
boot web-package
webfile { backup | main }
Optional
Switch the file attributes
between main and backup
boot attribute-switch
{ all | app | configuration
| web } fabric
Optional
Specify to enable user to
use the customized
password to enter the
BOOT menu
startup bootrom-access
enable
Optional
By default, the user is
enabled to use the
customized password to
enter the BOOT menu.
Display the information
about the app file used as
the startup file
display boot-loader
[ unit unit-id ]
Optional
These commands can
be executed in any view.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English