Huawei Quidway S5600 Series User Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
EAD Configuration
Huawei Technologies Proprietary
2-2
After a client is authenticated by the authentication server, the security policy server
sends to the switch an isolation ACL that limits client access rights. Meanwhile, the
security software in the client checks the security conditions of the client and sends the
conditions to the security policy server. If the client security conditions are not compliant
with the defined security specifications, the client is limited to some specific resources,
for example, virus patch server. If the client security conditions are compliant with the
defined security specifications, the security policy will distribute to the switch a safe
ACL that grants the client more access rights.
 Note:
The system does not support the scenario that the security policy server issues
QoS-Profile and isolation ACL at the same time.
2.3 EAD Configuration
The EAD configuration includes the following:
z Configuring the attributes, such as the user name, user type, and password for
access users. If local authentication is performed, you need to configure these
attributes on the switch; if remote authentication is performed, you need to
configure these attributes on AAA sever.
z Configuring RADIUS scheme.
z Configuring IP address for the security policy server.
z Associating domain with RADIUS scheme.
EAD is implemented typically in RADIUS scheme.
This section mainly describes configuration of IP address for the security policy server.
For other related information, refer to
Chapter 1 “AAA & RADIUS & HWTACACS
Configuration
”.
Table 2-1 EAD configuration
Operation Command Description
Enter system view
system-view
—
Enter RADIUS scheme
view
radius scheme
radius-scheme-name
—

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English