Huawei Quidway S5600 Series User Manual

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
Huawei Technologies Proprietary
2-22
Operation Command Description
Configure
multiple
interfaces
in system
view
dhcp server option code { ascii
ascii-string | hex hex-string&<1-10> |
ip-address ip-address&<1-8> }
{ interface interface-type
interface-number [ to interface-type
interface-number ] | all }
configured
2.3.8 Configure Connection Between the DHCP Interface Address Pool and
the BIMS Server
After configuring the connection between the DHCP interface address pool and the
BIMS server, you can enable the BIMS server to manage the devices that have
obtained IP addresses from the interface address pool.
Table 2-19 Configure connection between the DHCP interface address pool and the
BIMS server
Operation Command Description
Enter system view
system-view
-
Configure connection
between the DHCP
interface address pool
and the BIMS server
dhcp server bims-server
ip ip-address [ port
port-number ] sharekey key
{ interface interface-type
interface-number [ to
interface-type
interface-number ] | all }
Required
By default, no
connection between the
DHCP interface
address pool and the
BIMS server is
configured
2.4 DHCP Security Configuration
DHCP security configuration is needed to ensure the security of DHCP service.
2.4.1 Prerequisites
Before configuring DHCP security, you should first complete the DHCP server
configuration (either global address pool-based or interface address pool-based
DHCP server configuration).

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English