Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2 IGMP Snooping Configuration
Huawei Technologies Proprietary
2-13
2.3 Displaying and Maintaining IGMP Snooping
After the configuration above, you can execute the display command in any view to
verify the configuration by checking the displayed information.
You can execute the reset command in user view to clear the statistics information
about IGMP Snooping.
Table 2-13 Display information about IGMP Snooping
Operation Command Description
Display the current IGMP
Snooping configuration
display igmp-snooping
configuration
Display IGMP Snooping
message statistics
display igmp-snooping
statistics
Display IP and MAC
multicast groups in one or
all VLANs
display igmp-snooping
group [ vlan vlanid ]
You can execute the
display commands in any
view.
Clear IGMP Snooping
statistics
reset igmp-snooping
statistics
You can execute the
reset command in user
view.
2.4 IGMP Snooping Configuration Example
2.4.1 Example 1
Configure IGMP Snooping on a switch.
I. Network requirements
Connect the router port on the switch to the router, and other non-router ports which
belong to VLAN 10 to user PCs. Enable IGMP Snooping on the switch.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English