Huawei Quidway S5600 Series User Manual

Operation Manual - CLI
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Overview
Huawei Technologies Proprietary
1-12
1.3.4 Error Messages
If the command you enter passes the syntax check, it will be successfully executed;
otherwise an error message will appear.
Table 1-7 lists the common error messages.
Table 1-7 Common error messages
Error message Description
The command does not exist.
The keyword does not exist.
The parameter type is wrong.
Unrecognized command
The parameter value is out of range.
Incomplete command The command entered is incomplete.
Too many parameters You have entered too many parameters.
Ambiguous command The parameters entered are ambiguous.
Wrong parameter found at '^'
position.
The parameter labeled by '^' is unrecognizable.
1.3.5 Command Edit
The CLI provides basic command edit functions and supports multi-line editing. The
maximum number of characters a command can contain is 256.
Table 1-8 lists the CLI
edit operations.
Table 1-8 Edit operations
Press… To…
A common key
Insert the character the key represents at the
cursor and move the cursor one character to the
right if the edit buffer is not full.
The Backspace key
Delete the character on the left of the cursor and
move the cursor one character to the left.
The left arrow key or <Ctrl+B> Move the cursor one character to the left.
The right arrow key or <Ctrl+F> Move the cursor one character to the right.
The up arrow key or <Ctrl+P>
The down arrow key or
<Ctrl+N>
Access history commands.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English