Huawei Quidway S5600 Series User Manual

Operation Manual – GVRP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
GVRP Configuration
Huawei Technologies Proprietary
1-6
Timer Lower threshold Upper threshold
Leave
This lower threshold is
greater than twice the timeout
time of the Join timer. You
can change the threshold by
changing the timeout time of
the Join timer.
This upper threshold is less than the
timeout time of the LeaveAll timer.
You can change the threshold by
changing the timeout time of the
LeaveAll timer.
LeaveAll
This lower threshold is
greater than the timeout time
of the Leave timer. You can
change threshold by
changing the timeout time of
the Leave timer.
32,765 centiseconds
1.3 Displaying and Maintaining GVRP
After the above configuration, you can use the display commands in any view to
display the configuration information and operating status of GVRP/GARP, and thus
verify your configuration. You can use the reset command in user view to clear GARP
statistics.
Table 1-4 Display and maintain GVRP
Operation Command Description
Display GARP statistics
display garp statistics
[ interface interface-list ]
Display the settings of the
GARP timers
display garp timer
[ interface interface-list ]
Display GVRP statistics
display gvrp statistics
[ interface interface-list ]
Display the global GVRP
status
display gvrp status
The display commands
can be executed in any
view.
Clear GARP statistics
reset garp statistics
[ interface interface-list ]
The reset command can
be executed in user
view.
1.4 GVRP Configuration Example
1.4.1 Network requirements
You need to enable GVRP on the switches to enable dynamic VLAN information
registration and update between the switches.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English