Huawei Quidway S5600 Series User Manual

Operation Manual - HWPing
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
HWPing Configurations
Huawei Technologies Proprietary
1-3
Operation Command Description
Configure the
timeout time of the
test.
timeout time
Optional
By default, the timeout
time is 3 seconds.
Execute the test
test-enable
Required
1.2.3 Displaying HWPing Configuration
After the above HWPing configurations, you can execute the display command in any
view to display the information of operation status through which you can verify the
configuration effect.
Table 1-2 Display HWPing configuration
Operation Command Description
Display the information of
HWPing test history
display hwping history
[ administrator-name
operation-tag ]
Display the latest HWPing
test results
display hwping results
[ administrator-name
operation-tag ]
The display command
can be executed in any
view.
1.2.4 Configuration Example
I. Network Requirement
Perform an HWPing ICMP test between two switches. Like a ping test, this test uses
ICMP to test the RTTs of data packets between the source and the destination.
II. Configuration procedure
# Enable HWPing Client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwping-agent enable
# Create an HWPing test group “administrator icmp”.
[Quidway] hwping administrator icmp
# Specify the test type as ICMP.
[Quidway-hwping-administrator-icmp] test-type icmp
# Specify the destination IP address as 1.1.1.99.
[Quidway-hwping-administrator-icmp] destination-ip 1.1.1.99

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English