Huawei Quidway S5600 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-23
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 9
weight of queue 6: 13
weight of queue 7: 15
1.11 Configuring Traffic Statistics
Refer to 1.1.12 Traffic-based Traffic Statistics for the introduction to traffic statistics.
1.11.1 Configuration Prerequisites
z ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
z The ports that needs this configuration are specified
1.11.2 Configuration Procedure of Traffic Statistics
Table 1-16 Configure traffic statistics
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Use the ACL rules in
traffic identifying and
perform traffic
statistics on the
packets matching with
the ACL rules.
traffic-statistic
inbound acl-rule
Required
Display the traffic
statistics.
display
qos-interface
{ interface-type
interface-number |
unit-id }
traffic-statistic
Display all the QoS
settings of the port
display
qos-interface
{ interface-type
interface-number |
unit-id } all
Optional
You can execute the display
command in any view
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in
Table 1-9.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English