Huawei Quidway S5600 Series - Configuration Example of Priority Remark

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-26
1.12.2 Configuration Example of Priority Remark
I. Network requirements
Mark ef on the packets that PC1 whose IP address is 1.0.0.2 sends from 8:00 to 18:00
every day to provide the basis of precedence for the upper-layer devices.
II. Network diagram
GE1/0/50
GE1/0/1
GE1/0/2
VLAN2,
1.0.0.1/8
VLAN3,
2.0.0.1/8
PC1
PC2
Figure 1-8 QoS configuration example
III. Configuration procedure
1) Define the time rang from 8:00 to 18:00
# Define the time rang
<Quidway> system-view
[Quidway] time-range test 8:00 to 18:00 daily
2) Define the traffic rules of PC packets
# Enter number-identification-based basic ACL view identified.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule 0 permit source 1.0.0.1 0.255.255.255
time-range test
[Quidway-acl-basic-2000] quit
3) Remark ef precedence on the packets that PC1 sends
[Quidway-GigabitEthernet1/0/1] traffic-priority inbound ip-group 2000 dscp ef