Huawei Quidway S5600 Series User Manual

Operation Manual – Port Basic Configuration
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Port Basic Configuration
Huawei Technologies Proprietary
1-12
Operation Command Description
Enable the giant-frame
statistics function
giant-frame statistics enable
Optional
By default, the
giant-frame statistics
function is not enabled.
1.2.13 Displaying Basic Port Configuration
After the above configurations, you can execute the display commands in any view to
display information about Ethernet ports, so as to verify your configurations.
You can execute the reset counters command in user view to clear the statistics of
Ethernet ports.
Table 1-16 Display basic port configuration
Operation Command Remarks
Display port
configuration
information
display interface
[ interface-type | interface-type
interface-number ]
Display information
about a specified
optical port
display
transceiver-information
interface interface-type
interface-number
Display the
enable/disable status
of port loopback
detection
display loopback-detection
Display brief
information about port
configuration
display brief interface
[ interface-type
interface-number ] [ | { begin |
include | exclude } string ]
Display the hybrid or
trunk ports
display port { hybrid | trunk |
combo }
You can execute the
display commands in
any view.
Display port
information about a
specified unit
display unit unit-id interface
Clear port statistics
reset counters interface
[ interface-type | interface-type
interface-number ]
You can execute the
reset command in user
view.
After 802.1x is enabled
on a port, clearing the
statistics on the port will
not work.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English