Huawei Quidway S5600 Series User Manual

Operation Manual - Port Isolation
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Port Isolation Configuration
Huawei Technologies Proprietary
1-1
Chapter 1 Port Isolation Configuration
1.1 Port Isolation Overview
Through the port isolation feature, you can add the ports to be controlled into an
isolation group to isolate the Layer 2 and Layer 3 data between each port in the
isolation group. Thus, you can improve the network security and network in a more
flexible way.
Currently, you can configure only one isolation group on a switch. The number of
Ethernet ports an isolation group can accommodate is not limited.
 Note:
The port isolation function is independent of VLAN configuration.
1.2 Port Isolation Configuration
Table 1-1 lists the operations to add an Ethernet port to an isolation group to isolate
Layer 2 data between each port in the isolation group.
Table 1-1 Configure port isolation
Operation Command Description
Enter system view
system-view
-
Enter Ethernet port view
interface interface-type
interface-number
-
Add the Ethernet port to
the isolation group
port isolate
Required
By default, an isolation
group contains no port.
 Note:
When the port isolate command or undo port isolate command is executed, the
other ports which are in the same aggregation group with the current port in the local
device will be added to or removed from the isolation group together at the same time.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English