Huawei Quidway S5600 Series User Manual

Operation Manual - DLDP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
DLDP Configuration
Huawei Technologies Proprietary
1-9
 Note:
After the ports are DLDP down due to the detection of unidirectional link., you can use
the command here to reset the DLDP status of these ports to retrieve DLDP probes.
Table 1-8 Reset DLDP status
Operation Command Description
Enter system view
system-view
Reset the DLDP status of the system
dldp reset
Enter Ethernet port view
interface interface-type
interface-number
Reset the DLDP status of a port
dldp reset
Optional
Caution:
This command only applies to the ports in DLDP down status.
1.3 DLDP Network Example
I. Network requirements
As shown in Figure 1-3:
z Switch A and Switch B are connected through two pairs of fibers. Both of them
support DLDP;
z Suppose the fibers between Switch A and Switch B are connected inversely.
DLDP disconnects the unidirectional links after discovering them;
z When the network administrator connects the fiber correctly, the ports taken down
by DLDP are restored.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English