Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
BootROM and Host Software Loading
Huawei Technologies Proprietary
1-2
Note:
The loading process of the BootROM software is the same as that of the host software,
except that during the former process, you should press <Ctrl+U> and <Enter> after
entering the Boot Menu and the system gives different prompts. The following text
mainly describes the BootROM loading process.
1.2.1 Boot Menu
Starting......
***********************************************************
* *
* Quidway S5600 BOOTROM, Version 318 *
* *
***********************************************************
Copyright (c) 1998-2005 Huawei Technologies Co., Ltd.
Creation date : Dec 20 2005, 15:52:47
CPU type : BCM1122
CPU Clock Speed : 400MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 00e0fc005600
Press Ctrl-B to enter Boot Menu... 5
Press <Ctrl+B>. The system displays:
Password :
Note:
To enter the Boot Menu, you should press <Ctrl+B> within five seconds after the
information “Press Ctrl-B to enter Boot Menu...” appears. Otherwise, the system starts
to decompress the program; and if you want to enter the Boot Menu at this time, you will
have to restart the switch.
Input the correct BootROM password (no password is need by default). The system
enters the Boot Menu:
BOOT MENU
To Next Page
Loading...
Need help?
General