Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 8 MSDP Configuration
Huawei Technologies Proprietary
8-16
8.5 Displaying and Maintaining MSDP Configuration
I. Displaying and debugging MSDP configuration
After the above-mentioned configuration, you can use the display command in any
view to view the MSDP running information, so as to verify configuration result.
In the user view, you can execute the reset command to reset the MSDP counter.
Table 8-12 Display and debug MSDP configuration
Operation Command Description
Display the brief
information of MSDP
peer state
display msdp brief
Display the detailed
information of MSDP
peer status
display msdp peer-status
[ peer-address ]
Display the (S, G) state
learned from MSDP
peers
display msdp sa-cache
[ group-address |
[ source-address ] ]
[autonomous-system-number ]
Display the number of
sources and groups in
the MSDP cache
display msdp sa-count
[autonomous-system-number ]
Reset the TCP
connection with the
specified MSDP peer
reset msdp peer
peer-address
Clear the cached SA
messages
reset msdp sa-cache
[ group-address ]
Clear the statistics
information of the
specified MSDP peer
without resetting the
MSDP peer
reset msdp statistics
[ peer-address ]
You can execute the
display command in
any view.
II. Tracing the transmission path of an SA message over the network
You can use the msdp-tracert command in any view to trace the path along which the
multicast data travels from the multicast source to the destination receiver over the
network, so as to locate errors, if any.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English