Huawei Quidway S5600 Series User Manual

Operation Manual – Cluster
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Cluste
r
Huawei Technologies Proprietary
1-12
Operation Command Description
Enter cluster view
cluster
Required
Configure the
network
management (NM)
interface for the
cluster
nm-interface
Vlan-interface vlan-id
Optional
1.3 Member Device Configuration
1.3.1 Member Device Configuration Tasks
Table 1-12 Member device configuration tasks
Operation Description Related section
Enable NDP
globally and for
specific ports
Required
Section
1.3.2 Enabling NDP
Globally and for Specific Ports
Enable NTDP
globally and for
specific ports
Required
Section
1.3.3 Enabling NTDP
Globally and for Specific Ports
Configure member
devices to access
FTP/TFTP server
of the cluster
Required
Section
1.3.4 Configure
Member Devices to Access
FTP/TFTP Server of the
Cluster
1.3.2 Enabling NDP Globally and for Specific Ports
Table 1-13 Enable NDP globally and for specific ports
Operation Command Description
Enter system view
system-view
—
Enable NDP globally
ndp enable
Required
In system view
ndp enable interface
port-list
Enter
Ethernet
port
view
interface interface-type
interface-number
Enable
NDP for
specified
ports
In
Ethernet
port
view
Enable
NDP on
the port
ndp enable
Required
You can choose to
enable NDP in system
view or in Ethernet port
view

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English