Huawei Quidway S5600 Series - Displaying Route Capacity Configuration

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 7 Route Capacity Configuration
Huawei Technologies Proprietary
7-3
Caution:
If automatic protocol recovery is disabled, the broken OSPF or BGP connection will not
recover even when the free memory exceeds the safety value. Therefore, do not
disable this function if not necessary.
7.3 Displaying Route Capacity Configuration
After the above configuration, you can use the display command in any view to display
and verify the route capacity configuration.
Table 7-3 Display route capacity configuration
Operation Command Description
Display memory occupancy
of a switch
display memory [ unit
unit-id ]
Optional
Display the route capacity
related memory setting and
state information
display memory limit
Optional