Huawei Quidway S5600 Series - Displaying Common Multicast Configuration

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 3 Common Multicast Configuration
Huawei Technologies Proprietary
3-4
Table 3-5 Clear the related multicast entries
Operation Command Description
Clear the
multicast
forwarding case
(MFC) forwarding
entries or
statistics
information about
the forwarding
entries
reset multicast forwarding-table
[ statistics ] { all | { group-address [ mask
{ group-mask | group-mask-length } ] |
source-address [ mask { source-mask |
source-mask-length } ] |
incoming-interface interface-type
interface-number } * }
Clear the related
MFC forwarding
entries
Clear the route
entries in the core
multicast routing
table
reset multicast routing-table { all |
{ group-address [ mask { group-mask |
group-mask-length } ] | source-address
[ mask { source-mask |
source-mask-length } ] |
{ incoming-interface interface-type
interface-number } } * }
Clear the route
entries in the core
multicast routing
table
3.3 Displaying Common Multicast Configuration
After the configuration above, you can execute the display command in any view to
verify the configuration by checking the displayed information.
The multicast forwarding table is mainly used for debugging. Generally, you can get the
required information by checking the core multicast routing table.