Huawei Quidway S5600 Series - Troubleshooting Ethernet Port Configuration

Operation Manual – Port Basic Configuration
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Port Basic Configuration
Huawei Technologies Proprietary
1-14
1.4 Troubleshooting Ethernet Port Configuration
Symptom: Fail to configure the default VLAN ID of a port.
Solution: Take the following steps.
z Use the display interface or display port command to check if the port is a trunk
port or a hybrid port. If not, configure it to a trunk port or a hybrid port.
z Configure the default VLAN ID.