Huawei Quidway S5600 Series User Manual

Operation Manual – MAC Address Table
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 MAC Address Table
Management
Huawei Technologies Proprietary
1-4
1.2 Configuring MAC Address Table Management
1.2.1 Configuration Overview
Table 1-2 Configure MAC address table management
Configuration task Remarks Section
Configuring a MAC Address Entry Required
Section
1.2.2 “Configuring
a MAC Address Entry
”
Setting the Aging Time of MAC
Address Entries
Optional
Section
1.2.3 “Setting the
Aging Time of MAC
Address Entries
”
Setting the Maximum Number of
MAC Addresses a Port Can Learn
Optional
Section
1.2.4 “Setting the
Maximum Number of MAC
Addresses a Port Can
Learn
”
1.2.2 Configuring a MAC Address Entry
You can add, modify, or remove one MAC address entry, remove all MAC address
entries (unicast MAC addresses only) concerning a specific port, or remove specific
type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
I. Adding a MAC address entry in system view
Table 1-3 Add a MAC address entry in system view
Operation Command Description
Enter system view
system-view
—
Add a MAC address entry
mac-address { static | dynamic
| blackhole } mac-address
interface interface-type
interface-number vlan vlan-id
Required
Caution:
When you add a MAC address entry, the port specified by the interface argument
must belong to the VLAN specified by the vlan argument in the command. Otherwise,
the entry will not be added.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English