Huawei Quidway S5600 Series User Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1 IP Routing Protocol Overview
Huawei Technologies Proprietary
1-4
10.0.0.0
11.0.0.0
12.0.0.0
13.0.0.0
14.0.0.0
15.0.0.0
16.0.0.0
R8
2
10.0.0.1
1
11.0.0.1
3
13.0.0.4
R2
R3
R5
R6
R7
R1
R4
10.0.0.2
16.0.0.316.0.0.1
16.0.0.2
13.0.0.3
15.0.0.1
15.0.0.2
14.0.0.1
14.0.0.2
13.0.0.2
13.0.0.1
12.0.0.1
12.0.0.2
12.0.0.3
Routing table of router R8
Destination
network
10.0.0.0
Next hop Interface
10.0.0.1 2
11.0.0.0 11.0.0.1 1
12.0.0.0 11.0.0.2 1
11.0.0.2
13.0.0.0 13.0.0.4 3
14.0.0.0 13.0.0.2 3
15.0.0.0 13.0.0.2 3
16.0.0.0 10.0.0.2 2
10.0.0.0
11.0.0.0
12.0.0.0
13.0.0.0
14.0.0.0
15.0.0.0
16.0.0.0
R8
2
10.0.0.1
1
11.0.0.1
3
13.0.0.4
R2
R3
R5
R6
R7
R1
R4
10.0.0.2
16.0.0.316.0.0.1
16.0.0.2
13.0.0.3
15.0.0.1
15.0.0.2
14.0.0.1
14.0.0.2
13.0.0.2
13.0.0.1
12.0.0.1
12.0.0.2
12.0.0.3
Routing table of router R8
Destination
network
10.0.0.0
Next hop Interface
10.0.0.1 2
11.0.0.0 11.0.0.1 1
12.0.0.0 11.0.0.2 1
11.0.0.2
13.0.0.0 13.0.0.4 3
14.0.0.0 13.0.0.2 3
15.0.0.0 13.0.0.2 3
16.0.0.0 10.0.0.2 2
10.0.0.0
11.0.0.0
12.0.0.0
13.0.0.0
14.0.0.0
15.0.0.0
16.0.0.0
R8
2
10.0.0.1
1
11.0.0.1
3
13.0.0.4
R2
R3
R5
R6
R7
R1
R4
10.0.0.2
16.0.0.316.0.0.1
16.0.0.2
13.0.0.3
15.0.0.1
15.0.0.2
14.0.0.1
14.0.0.2
13.0.0.2
13.0.0.1
12.0.0.1
12.0.0.2
12.0.0.3
Routing table of router R8
Destination
network
10.0.0.0
Next hop Interface
10.0.0.1 2
11.0.0.0 11.0.0.1 1
12.0.0.0 11.0.0.2 1
11.0.0.2
13.0.0.0 13.0.0.4 3
14.0.0.0 13.0.0.2 3
15.0.0.0 13.0.0.2 3
16.0.0.0 10.0.0.2 2
10.0.0.0
11.0.0.0
12.0.0.0
13.0.0.0
14.0.0.0
15.0.0.0
16.0.0.0
R8
2
10.0.0.1
1
11.0.0.1
3
13.0.0.4
R2
R3
R5
R6
R7
R1
R4
10.0.0.2
16.0.0.316.0.0.1
16.0.0.2
13.0.0.3
15.0.0.1
15.0.0.2
14.0.0.1
14.0.0.2
13.0.0.2
13.0.0.1
12.0.0.1
12.0.0.2
12.0.0.3
Routing table of router R8
Destination
network
10.0.0.0
Next hop Interface
10.0.0.1 2
11.0.0.0 11.0.0.1 1
12.0.0.0 11.0.0.2 1
11.0.0.2
13.0.0.0 13.0.0.4 3
14.0.0.0 13.0.0.2 3
15.0.0.0 13.0.0.2 3
16.0.0.0 10.0.0.2 2
Figure 1-2 Routing table
The Quidway S5600 Series Ethernet Switches (hereinafter referred to as S5600 series)
support the configuration of static routes as well as a series of dynamic routing
protocols such as RIP, OSPF and BGP. Moreover, the switches in operation can
automatically obtain some direct routes according to interface status and user
configuration.
1.2 Routing Management Policy
On an S5600 switch, you can manually configure a static route to a certain destination,
or configure a dynamic routing protocol to make the switch interact with other routers in
the internetwork and find routes by routing algorithm. On an S5600 switch, the static
routes configured by the user and the dynamic routes discovered by routing protocols
are managed uniformly. The static routes and the routes learned or configured by
different routing protocols can also be shared among routing protocols.
1.2.1 Routing Protocols and Preferences
Different routing protocols may discover different routes to the same destination, but
only one route among these routes and the static routes is optimal. In fact, at any given
moment, only one routing protocol can determine the current route to a specific
destination. Routing protocols (including static routing) are endowed with different
preferences. When there are multiple routing information sources, the route discovered
by the routing protocol with the highest preference will become the current route.
Routing protocols and their default route preferences (the smaller the value, the higher
the preference is) are shown in
Table 1-1.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English