Huawei Quidway S5600 Series - Sftp Configuration Example

Operation Manual - SSH Terminal Services
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
SSH Terminal Services
Huawei Technologies Proprietary
1-21
Description Operation Command
Display the current
source IP address
specified for the SFTP
Client.
display sftp source-ip
Optional
This command
can be executed
in any view.
1.2.4 SFTP Configuration Example
I. Network requirements
As shown in Figure 1-5,
z An SSH connection is present between Switch A and Switch B.
z Switch B serves as an SFTP server, with IP address 10.111.27.91.
z Switch A serves as an SFTP client.
z An SSH user name abc with password hello is created.
II. Network diagram
PC
IP address ：10.111.27.91
SFTP Client
Switch B
SFTP Server
Switch A
PC
IP address ：10.111.27.91
Switch B
SFTP Server
SFTP Client
Switch A
Figure 1-5 Network diagram for SFTP configuration
III. Configuration procedure
1) Configure Switch B (SFTP server)
# Enable the SFTP server.
[Quidway] sftp server enable
# Specify SFTP service for SSH user abc.
[Quidway] ssh user abc service-type sftp
2) Configure Switch A (SFTP client)
# Establish a connection to the remote SFTP server and enter SFTP client view.