Huawei Quidway S5600 Series User Manual

Operation Manual – PoE & PoE Profile
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
PoE Configuration
Huawei Technologies Proprietary
1-6
1.8 Configuring PoE Over-Temperature Protection on the
Switch
If this function is enabled, the switch disables the PoE feature on all ports when its
internal temperature exceeds 65
0
C (149
0
F) for self-protection, and restores the PoE
feature settings on all its ports when the temperature drops below 60
0
C (140
0
F).
Table 1-7 Configure PoE over-temperature protection on the switch
Operation Command Description
Enter system view
system-view
—
Enable the PoE
over-temperature
protection feature on the
switch
poe
temperature-protection
enable
Required
By default, the PoE
over-temperature
protection feature is
enabled on the
switch
 Note:
z When the internal temperature of the switch decreases to 65
0
C (149
0
F) below , but
60
0
C (140
0
F) above, the switch still disables the PoE feature on all the ports.
z When the internal temperature of the switch increases to 60
0
C (140
0
F) above, but
65
0
C (149
0
F) above , the switch still enables the PoE feature on all the ports.
1.9 Upgrading the PSE Processing Software Online
The online upgrading of PSE processing software can update the processing software
or repair the software if it is damaged. After downloading the PSE processing software
to the Flash of the switch, you can perform the following configuration. Refer to “File
System Management” for how to download the PSE processing software.
Table 1-8 Upgrade PSE processing software online
Operation Command Description
Enter system view
system-view
—
Upgrade the PSE
processing software
online
poe update { refresh |
full } filename
Required

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English