Huawei Quidway S5600 Series User Manual

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 4
Device Management
Huawei Technologies Proprietary
4-4
Table 4-7 Display the operating status of the device management
Operation Command Description
Display the APP to be
adopted at reboot
display boot-loader
[ unit unit-id ]
Display the module type
and operating status of
each board
display device
[ manuinfo [ unit unit-id ]
| unit unit-id ]
Display CPU usage of a
switch
display cpu [ unit
unit-id ]
Display the operating
status of the fan
display fan [ unit unit-id
[ fan-id ] ]
Display memory usage of a
switch
display memory [ unit
unit-id | limit ]
Display the operating
status of the power supply
display power [ unit
unit-id [ power-id ] ]
Display system diagnostic
information or save system
diagnostic information to a
file suffixed with diag in the
Flash memory
display
diagnostic-information
Display enabled debugging
on a specified switch or all
switches in the fabric
display debugging
[ fabric | unit unit-id ]
[ interface interface-type
interface-number ]
[ module-name ]
Display enabled debugging
on all switches in the fabric
in terms of module names
display debugging
fabric by-module
You can execute the
display command in any
view.
Display the switch
operating ambient
display environment
You can execute the
display environment
command in user view.
4.4 Remote Switch Update Configuration Example
I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch to remotely update the switch software by using the
device management commands through CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration
PC and the FTP server.
Perform the following configuration on the FTP server.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English