Huawei Quidway S5600 Series - Configuring Static Domain Name Resolution; Configuring Dynamic Domain Name Resolution; Configuration Dynamic Domain Name Resolution

Operation Manual - DNS
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
DNS Configuration
Huawei Technologies Proprietary
1-3
1.2 Configuring Static Domain Name Resolution
Table 1-1 Configure static domain name resolution:
Operation Command Description
Enter system
view
system-view
—
Create a
hostname to IP
address mapping
entry
ip host hostname
ip-address
Required
By default, there is no mapping
entry for host name and IP
address.
 Note:
The last IP address you assigned to the host name can overwrite the old one if there is
any.
You may create up to 50 entries for the domain name resolution.
1.3 Configuring Dynamic Domain Name Resolution
1.3.1 Configuration Dynamic Domain Name Resolution
Table 1-2 Configure dynamic domain name resolution:
Operation Command Description
Enter the system view
system-view
—
Enable dynamic domain
name resolution
dns resolve
Required
Disabled by default
Configure an IP address to
the DNS Server
dns server ip-address
Required
No IP address is
assigned by default.
Configure DNS suffixes
dns domain domain-name
Optional
No DNS suffix by
default
 Note:
You may configure up to 6 DNS Servers and 10 DNS suffixes.