Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2 IGMP Snooping Configuration
Huawei Technologies Proprietary
2-6
2.2 IGMP Snooping Configuration
The following table lists all the IGMP Snooping configuration tasks:
Table 2-4 IGMP Snooping configuration tasks
Operation Description Related section
Enable IGMP Snooping Required
Section
2.2.1 Enabling IGMP
Snooping
Configure timers Optional Section 2.2.2 Configuring Timers
Enable IGMP fast leave Optional
Section
2.2.3 Enabling IGMP Fast
Leave
Configure IGMP
Snooping filter
Optional
Section 2.2.4 Configuring IGMP
Snooping Filtering ACL
Configure to limit ports
passing multicast group
Optional
Section
2.2.5 Configuring to Limit
Number of Multicast Groups on a
Port
Configure IGMP
Snooping queriers
Optional
Section 2.2.6 Configuring IGMP
Querier
Configure multicast VLAN Optional
Section
2.2.7 Configuring
Multicast VLAN
2.2.1 Enabling IGMP Snooping
You can use the command here to enable IGMP Snooping so that it can establish and
maintain MAC multicast group forwarding tables at layer 2.
Table 2-5 Enable IGMP Snooping
Operation Command Description
Enter system view system-view —
Enable IGMP Snooping
globally
igmp-snooping enable
Required
IGMP Snooping is
disabled globally.
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping
on the VLAN
igmp-snooping enable
Required
By default, IGMP
Snooping is disabled on
the VLAN.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English