Huawei Quidway S5600 Series User Manual

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
SNMP Configuration
Huawei Technologies Proprietary
1-8
 Note:
z In the environment of a single device, use the display logbuffer command to view
the logging information for the get and set operations sent from NMS.
z In the fabric environment, use the display logbuffer command on the master
device to view the logging information for the set operation. Use the display
logbuffer command on the device that has received the get message to view the
logging information for the get operation sent from NMS.
1.5 Displaying SNMP
After the above configuration is completed, execute the display command in any view
to view the running status of SNMP, and to verify the configuration.
Table 1-6 Display SNMP
Operation Command Description
Display system information of the
current SNMP device
display snmp-agent
sys-info [ contact |
location | version ]*
Display SNMP packet statistics
information
display snmp-agent
statistics
Display the engine ID of the current
device
display snmp-agent
{ local-engineid |
remote-engineid }
Display group information about the
device
display snmp-agent
group [ group-name ]
Display SNMP user information
display snmp-agent
usm-user [ engineid
engineid | username
user-name | group
group-name ]
Display Trap list information
display snmp-agent
trap-list
Display the currently configured
community name
display snmp-agent
community [ read |
write ]
Display the currently configured MIB
view
display snmp-agent
mib-view [ exclude |
include | viewname
view-name ]
The display
command
can be
executed in
any view

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English