Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 3 Common Multicast Configuration
Huawei Technologies Proprietary
3-3
Caution:
The other multicast configurations do not take effect until multicast is enabled.
3.2.2 Configure Suppression on the Multicast Source Port
I. Configure suppression on the multicast source port in system view
Table 3-3 Configure suppression on the multicast source port in system view
Operation Command Description
Enter system
view
system-view —
Configure
suppression on
the multicast
source port
multicast-source-de
ny [ interface
interface-list ]
Required
The suppression on the multicast
source port feature is disabled by
default.
II. Configure suppression on the multicast source port in Ethernet port view
Table 3-4 Configure suppression on the multicast source port in Ethernet port view
Operation Command Description
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure suppression on
the multicast source port
in Ethernet port view
multicast-source-deny
Optional
The suppression on the
multicast source port
feature is disabled on all
ports of the switch by
default.
3.2.3 Clear the Related Multicast Entries
Use the reset command in user view to clear the related statistics information about the
common multicast configuration.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English