EasyManuals Logo

Huawei Quidway S5600 Series User Manual

Huawei Quidway S5600 Series
991 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #653 background imageLoading...
Page #653 background image
Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
Huawei Technologies Proprietary
2-23
2.4.2 Configuring Private DHCP Server Detecting
A private DHCP server on a network also answers IP address request packets and
assigns IP addresses to DHCP clients. However, the IP addresses they assigned may
conflict with those of other hosts. As a result, users cannot normally access networks.
This kind of DHCP servers are known as private DHCP servers.
With the private DHCP server detecting function enabled, when a DHCP client sends
the DHCP-REQUEST packet, the DHCP server tracks the information (such as the IP
addresses and interfaces) of DHCP servers to enable the administrator to detect
private DHCP servers in time and take proper measures.
Table 2-20 Enable detection of a private DHCP server
Operation Command Description
Enter system view
system-view
—
Enable the private
DHCP server
detecting function
dhcp server detect
Required
By default, the private DHCP
server detecting function is
disabled
2.4.3 Configuring IP Address Detecting
To avoid IP address conflicts caused by assigning the same IP address to multiple
DHCP clients simultaneously, you can configure a DHCP server to detect an IP
address before it assigns the address to a DHCP client.
IP address detecting is achieved by performing ping operations. To detect whether an
IP address is currently in use, the DHCP server sends an ICMP packet with the IP
address to be assigned as the destination and waits for a response. If the DHCP
server receives no response within a specified time, it resends an ICMP packet. This
procedure repeats until the DHCP server receives a response or the number of the
sent ICMP packets reaches the specified maximum number. The DHCP server
assigns the IP address to the DHCP client only when no response is received during
the whole course, thus ensuring that an IP address is assigned to one DHCP client
exclusively.
Table 2-21 Configure IP address detecting
Operation Command Description
Enter system view
system-view
—

Table of Contents

Other manuals for Huawei Quidway S5600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S5600 Series and is the answer not in the manual?

Huawei Quidway S5600 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S5600 Series
CategorySwitch
LanguageEnglish

Related product manuals