Huawei Quidway S5600 Series User Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-10
Operation Command Description
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can contain up
to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set history command
buffer size
history-comman
d max-size value
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands
by default.
Set the timeout time
for the user interface
idle-timeout
minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation
is performed in the user interface
within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Note that the level the commands of which are available to users logging into a switch
depends on both the authentication-mode password and the user privilege level
level command, as listed in the following table.
Table 2-7 Determine the command level (B)
Scenario
Authentication
mode
User type Command
Command
level
The user privilege level
level command is not
executed
Level 3
Local authentication
(authentication-m
ode password)
Users logging in
through the
AUX user
interface
The user privilege level
level command is
already executed
Determined
by the level
argument

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English