Huawei Quidway S5600 Series User Manual

Operation Manual – VRRP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
VRRP Configuration
Huawei Technologies Proprietary
1-8
1.2.3 Configuring Backup Group-Related Parameters
Table 1-4 lists the operations to configure a switch in a backup group.
Table 1-4 Configure backup group-related parameters
Operation Command Description
Enter system view system-view —
Create a VLAN
vlan vlan-id
Required
By default, vlan 1 is the
default vlan.
Quit to system view
quit
—
Enter VLAN
interface view
interface Vlan-interface
valn-id
—
Configure the
priority of the
backup group
vrrp vrid virtual-router-id
priority priority
Optional
By default, the priority of a
backup group is 100.
Configure the
preemptive mode
and delay period
for the backup
group
vrrp vrid virtual-router-id
preempt-mode [ timer
delay delay-value ]
Optional
By default, a backup group
operates in the preemptive
mode.
Configure the
authentication type
and authentication
key
vrrp authentication-mode
authentication-type
authentication-key
Optional
By default, a backup group
does not authenticate.
Configure the
VRRP timer
vrrp vrid virtual-router-id
timer advertise
adver-interval
Optional
By default, the interval for the
master switch in a backup
group to send VRRP packets
is 1 second.
Specify the
interface to be
tracked
vrrp vrid virtual-router-id
track vlan-interface vlan-id
[ reduced value-reduced ]
Optional
value-reduced: Value by
which the priority is to be
reduced. By default, this
value is 10.
1.2.4 Configuring the Port Tracking Function
You can perform the following configuration to implement port tracking function for the
VRRP backup group.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English