Huawei Quidway S5600 Series - Page 191

Operation Manual - Port Isolation
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Port Isolation Configuration
Huawei Technologies Proprietary
1-3
III. Configuration procedure
# Add GigabitEthernet1/0/2, GigabitEthernet1/0/3, and GigabitEthernet1/0/4 ports to
the isolation group.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface GigabitEthernet1/0/2
[Quidway-GigabitEthernet1/0/2] port isolate
[Quidway-GigabitEthernet1/0/2] quit
[Quidway] interface GigabitEthernet1/0/3
[Quidway-GigabitEthernet1/0/3] port isolate
[Quidway-GigabitEthernet1/0/3] quit
[Quidway] interface GigabitEthernet1/0/4
[Quidway-GigabitEthernet1/0/4] port isolate
[Quidway-GigabitEthernet1/0/4] quit
[Quidway]
# Display the information about the ports in the isolation group.
<Quidway> display isolate port
Isolated port(s) on UNIT 1:
GigabitEthernet1/0/2, GigabitEthernet1/0/3, GigabitEthernet1/0/4