Huawei Quidway S5600 Series User Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 5 BGP Configuration
Huawei Technologies Proprietary
5-37
Operation Command
Display information about BGP route
dampening
display bgp routing dampened
Display routes with different source ASs
display bgp [ multicast ] routing
different-origin-as
Display statistic information about route
flaps.
display bgp routing flap-info
[ regular-expression
as-regular-expression | as-path-acl
acl-number | network-address [ mask
[ longer-match ] ] ]
Display routing information sent to or
received from a specific BGP peer
display bgp [ multicast ] routing peer
ip-address { advertised-routes |
received-routes | dampened |
regular-expression } [ network-address
[ mask ] | statistic ]
Display routing information matching
with the AS regular expression
display bgp [ multicast ] routing
regular-expression
as-regular-expression
Display routing statistics of BGP
display bgp [ multicast ] routing
statistic
5.8.2 BGP Connection Reset
When a BGP routing policy or protocol changes, if you need to make the new
configuration effective through resetting the BGP connection, perform the following
configuration in user view.
Table 5-20 Reset BGP connection
Operation Command
Reset all BGP connections
reset bgp all
Reset the BGP connection with a
specified peer
reset bgp ip-address
Reset the BGP connection with a
specified peer group
reset bgp group group-name
5.8.3 Clearing BGP Information
Use the reset command in user view to clear the related BGP statistic information.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English