Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
Huawei Technologies Proprietary
7-24
z Because PIM-SM needs the support of RP and BSR, you must execute the
display pim bsr-info command to see whether BSR information exists. If not,
you must check whether there are unicast routes to the BSR. Then use the
display pim rp-info command to check whether the RP information is right. If RP
information does not exist, you must check whether there are unicast routes to
RP.
z Use the display pim neighbor command to check whether the neighboring
relationship is correctly established.
To Next Page
Loading...
