Operation Manual – 802.1x
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
802.1x Configuration
Huawei Technologies Proprietary
1-22
[Quidway-radius-radius1] timer realtime-accounting 15
# Configure to send the user name to the RADIUS server with the domain name
removed beforehand.
[Quidway-radius-radius1] user-name-format without-domain
[Quidway-radius-radius1] quit
# Create the domain named “aabbcc.net” and enter its view.
[Quidway] domain enable aabbcc.net
# Specify to adopt radius1 as the RADIUS scheme of the user domain. If RADIUS
server is invalid, specify to adopt local authentication scheme.
[Quidway-isp-aabbcc.net] scheme radius-scheme radius1 local
# Specify the maximum number of users the user domain can accommodate to 30.
[Quidway-isp-aabbcc.net] access-limit enable 30
# Enable the idle disconnecting function and set the related parameters.
[Quidway-isp-aabbcc.net] idle-cut enable 20 2000
[Quidway-isp-aabbcc.net] quit
# Configure the default user domain named “aabbcc.net”.
[Quidway] domain default enable aabbcc.net
# Create a local access user account.
[Quidway] local-user localuser
[Quidway-luser-localuser] service-type lan-access
[Quidway-luser-localuser] password simple localpass
To Next Page
Loading...
