Huawei Quidway S5600 Series - Page 545

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-15
Operation Command Description
Set the maximum number of
access users that can be
contained in the ISP domain
access-limit { disable |
enable max-user-number }
Optional
After an ISP
domain is created,
the number of
access users it can
contain is unlimited
by default.
Set the user idle-cut function
idle-cut { disable | enable
minute flow }
Optional
By default, user
idle-cut function is
disabled.
Open/close the
accounting-optional switch
accounting optional
Optional
By default, once an
ISP domain is
created, the
accounting-optiona
l switch is closed.
Set the messenger function
messenger time { enable
limit interval | disable }
Optional
By default, the
messenger
function is
disabled.
Set the self-service server
location function
self-service-url { disable |
enable url-string }
Optional
By default, the
self-service server
location function is
disabled.
Caution:
z On an S5600 series switch, each access user belongs to an ISP domain. You can
configure up to 16 ISP domains on the switch. When a user logs in, if no ISP domain
name is carried in the user name, the switch assumes that the user belongs to the
default ISP domain.
z When charging a user, if the system does not find any available accounting server
or fails to communicate with any accounting server, it will not disconnect the user as
long as the accounting optional command has been executed.
z The self-service server location function must cooperate with a
self-service-supported RADIUS server (such as CAMS). Through self-service,
users can manage and control their accounts or card numbers by themselves. A
server installed with the self-service software is called a self-service server.