Huawei Quidway S5600 Series User Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-23
 Note:
Actually, the RADIUS protocol configuration only defines the parameters used for
information exchange between the switch and the RADIUS servers. To make these
parameters take effect, you must reference the RADIUS scheme configured with these
parameters in an ISP domain view. For specific configuration commands, refer to
section
1.3 "AAA Configuration".
1.4.1 Creating a RADIUS Scheme
The RADIUS protocol configuration is performed on a RADIUS scheme basis. You
should first create a RADIUS scheme and enter its view before performing other
RADIUS protocol configurations.
Table 1-12 Create a RADIUS scheme
Operation Command Description
Enter system view
system-view
—
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Caution:
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
1.4.2 Configuring RADIUS Authentication/Authorization Servers
Table 1-13 Configure RADIUS authentication/authorization server
Operation Command Description
Enter system view
system-view
—
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-na
me
Required
By default, a RADIUS
scheme named "system" has
already been created in the
system.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English